Skip to content
Theme
OnDevice Tools

GadgetsLaptops & PCs

How to calibrate a 3D printer for better print quality

Engadget outlines essential 3D printer calibration steps that resolve print failures and improve quality, helping users extend printer life.

3D printer bed levelling test using a paper gauge to check nozzle height and first-layer squish

Key takeaways

  • Calibration resolves adhesion, surface and dimensional issues on most FDM 3D printers.
  • Bed leveling, whether automatic or manual, forms the foundation for a successful first layer.
  • E-step adjustment verifies extruder output, important after nozzle or belt changes.
  • Temperature towers and flow tests fine-tune settings for specific filaments and printing conditions.
In this article
  1. Why calibration matters for print results
  2. Bed levelling and first-layer testing
  3. E-step and extrusion calibration
  4. Temperature towers and flow-rate tuning

Why calibration matters for print results

Calibration targets the root causes of common print failures, including poor bed adhesion, inconsistent layer height and dimensional mismatches. The procedure benefits both legacy printers needing manual tweaks and modern units with automated leveling features.

Bed levelling and first-layer testing

Begin with the machine switched off and cooled, then inspect the build surface and surrounding space for stability. Follow the specific levelling sequence for your model, whether it uses automatic bed sensing or manual adjustment wheels. This ensures a consistent first layer.

E-step and extrusion calibration

E-step calibration measures the actual filament extrusion against the expected amount, then adjusts the extruder steps accordingly. On Klipper-based systems, a rotation-distance setting performs the same check before flow-rate optimisation.

Temperature towers and flow-rate tuning

Illustration: temperature, printer, settings, chip and the labels Extrusion Calibration

Temperature towers expose how different nozzle settings affect stringing, bridging and surface quality across a single print. Flow-rate calibration uses test patches to detect over-extrusion buildup or under-extrusion gaps. Results can vary with filament type and printer condition.

Sources

  1. How to calibrate your 3D printer (and why you should)Engadget

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.