Skip to content
Theme
OnDevice Tools

GadgetsLaptops & PCs

Fibre optic cables: distance limits and signal loss

Fibre optic cables can span cities and oceans, but attenuation, cable type and installation issues determine how far data can travel reliably.

Illustration of fibre optic cables running from a street cabinet to a home router

Key takeaways

  • Fibre optic cables use light and total internal reflection to carry data much farther than copper Ethernet.
  • Attenuation from absorption and scattering gradually weakens the signal over distance.
  • Single-mode fibre is better for long runs, while multi-mode fibre is common for shorter runs.
  • Long undersea systems use optical amplifiers and multiplexing rather than one uninterrupted cable.
In this article
  1. Fibre in modern broadband
  2. How fibre carries data
  3. Why signals fade over distance
  4. Single-mode and multi-mode fibre
  5. Home networks and long undersea routes

Fibre in modern broadband

In an explainer published on 21 November 2026, Engadget says fibre optic cables can link neighbourhoods, cities and continents, but they cannot carry data forever without signal management. The technology is a major part of modern internet infrastructure, and many internet service providers highlight it because it offers a substantial speed improvement over older DSL services that use copper telephone lines.

Internet service providers often promote fibre because it can deliver a faster and more consistent connection than older copper-based broadband. One cable can contain many separate fibres, and each can carry its own data signals. That makes fibre attractive for city-wide networks, where providers need to serve many homes.

The move to fibre is also a move away from DSL, which uses copper telephone lines. Engadget describes fibre as a substantial upgrade over those older connections. The result is not only higher speed, but also a network that can be more reliable over longer runs. It is now used in city networks and in homes.

How fibre carries data

Illustration: fiber network, plane, internet, price and the labels Ethernet, Fibre Optic, Internet Service Providers

Fibre optic cables send data as light through strands made from glass or sometimes plastic. Engadget explains that the glass core has a refractive index high enough to keep light inside when it strikes the boundary at a shallow angle. This effect is called total internal reflection, and it allows the light to travel long distances without the kind of energy loss seen in metal wires.

That is different from Ethernet cables, which use twisted pairs of copper wires to carry electrical current. Copper has resistance, so it cannot be used over very long distances. Engadget notes that Cat5e Ethernet runs have a recommended limit of 100 metres, or just over 300 feet. Copper cables can also suffer from electromagnetic interference, which can affect reliability over long runs.

Why signals fade over distance

Even with total internal reflection, a little light is lost along the way because of absorption and scattering. This gradual weakening is called attenuation. Over a long enough route, the receiving equipment cannot separate useful data from noise.

Engadget says one continuous glass fibre can usually reach several kilometres before signal loss becomes a problem. The limit is not a single fixed number, because cable type and equipment also matter. This is why long-distance fibre networks need extra equipment to keep the signal usable.

Single-mode and multi-mode fibre

Fibre optic cables come in two main types: single-mode and multi-mode. Single-mode fibre carries one light beam at a time. It can carry signals over longer distances, but it needs special hardware that can cost much more.

Multi-mode fibre can send several light pulses, known as modes, at once. Those pulses may follow different paths and arrive at different moments. This is called modal dispersion, and over time it can make the receiver struggle to interpret the data. Multi-mode fibre has a wider core, which makes alignment with the sending and receiving equipment easier. That is why it is often chosen for shorter runs, while single-mode fibre can be better for longer runs because its stability can offset the extra cost.

Home networks and long undersea routes

For a typical home network, signal loss is unlikely to be the main concern. Engadget notes that multi-mode fibre can still cover hundreds of metres. In a home installation, tight bends are often a bigger issue, because light can escape from the core.

Fibre systems that cross continents use a different approach. Optical amplifiers are placed along the seabed to boost the signal over long distances. Multiplexing lets several data streams share one strand at the same time. Long-distance systems therefore do not rely on one unbroken cable. Instead, the route is made up of boosted sections. This helps the signal stay usable.

Sources

  1. How long can fiber optic cables be before they lose signal?Engadget

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.