Skip to content
Theme
OnDevice Tools

GadgetsLaptops & PCs

Mini PC builds are harder and costlier than they look

Engadget says small form factor cases limit part choice, airflow and the order in which a system can be assembled. Buyers should check dimensions and compatibility before ordering any components.

Illustration of a small Mini-ITX PC case open on a desk with a compact board and cooler inside

Key takeaways

  • Mini-ITX cases usually accept only Mini-ITX boards, while microATX cases fit both board sizes.
  • SFF power supplies, motherboards, coolers and graphics cards cost more than standard desktop parts.
  • Tight interiors restrict airflow, and fitting a discrete graphics card makes cooling harder.
  • Mini builds often need a fixed assembly order, unlike a standard ATX tower.
In this article
  1. What the report says
  2. Cases decide what fits
  3. Airflow and part prices
  4. Assembly order matters
  5. Why off-the-shelf mini PCs differ

What the report says

A mini PC build can be rewarding, but it brings problems that a full-size desktop does not, according to Engadget. The site published its assessment on 21 November 2026. It treats small form factor, or SFF, systems as a niche with its own rules rather than a simple shrunk-down tower.

Engadget notes that custom building has become a fixture of content creation and social media. Many people have watched someone assemble a PC even if they have never done it themselves. Mini systems are among the more unusual corners of that hobby.

The piece is guidance rather than laboratory testing. Engadget publishes no price figures, benchmarks or measured temperatures for the builds it describes.

Cases decide what fits

Most mini systems go into Mini-ITX or microATX cases, Engadget says. A Mini-ITX case will normally take only a Mini-ITX motherboard. A microATX case is slightly larger on average and can accept either board size.

Small does not always mean cheap. Some Mini-ITX cases come with extra features that raise the bill quickly, the site reports. Buyers who assume a smaller box must cost less can be caught out.

Engadget adds that many of these cases offer more interior space than their measurements suggest. Dimensions and part clearance still limit what goes inside. The site suggests comparing components against official specifications, or using a compatibility checker such as PCPartPicker, before buying.

Airflow and part prices

Illustration: graphics card, price, computer, Apple logo and the labels Mac Mini, Microatx, Mini PC

With less space inside, components have less air around them, according to Engadget. A discrete graphics card, meaning one on its own card, makes the problem worse. An APU, which puts the processor and the graphics on the same chip, leaves more room.

Cost is the other pressure point. SFF power supplies, motherboards, CPU coolers and graphics cards all carry higher prices than standard parts, the site says. Together they can add a surprising share to the total cost of a machine. For some buyers, that makes an ordinary ATX desktop the better value.

Assembly order matters

The build itself is the hardest part, Engadget reports. A standard ATX system can largely be put together in any sequence. A mini system often cannot, because part sizes and limited clearance dictate a fixed order.

That leaves less room for mistakes. A builder has to decide which component goes in first, and an error may mean taking out parts that are already fitted.

Why off-the-shelf mini PCs differ

Many commercial mini computers take a different route. Engadget points to Apple's Mac mini and some ASUS NUC models, which use a system-on-a-chip that places the processor and graphics on one piece of silicon. Memory is sometimes soldered to the motherboard, so it cannot be changed later.

That approach is not practical for a home builder, the site says, though some retail cases come close. Anyone planning a mini PC build should first fix the case, then confirm which board, cooler, power supply and graphics card fit inside it, and check the order of assembly before starting.

Sources

  1. Building your own mini PC is harder than you would thinkEngadget

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.