Skip to content
Theme
OnDevice Tools

SoftwareOpen Source & Linux

Flipper One pocket Linux PC raises $11.7 million in 24 hours

The Flipper One campaign has passed $11.7 million on Kickstarter, far above its $300,000 target. The portable Linux device is aimed at security research and networking projects.

Illustration of a Flipper One pocket Linux computer with expansion modules and a Kickstarter funding chart

Key takeaways

  • The Flipper One raised more than $11.7 million on Kickstarter in 24 hours.
  • The campaign target was $300,000, so the result is about 39 times the goal.
  • The device is an Arm-based Linux computer with Wi-Fi 6E, Gigabit Ethernet and optional 5G or satellite modules.
  • Flipper Devices plans shipping in July 2027, but warns component shortages may affect dates.
In this article
  1. Crowdfunding result
  2. What the Flipper One is
  3. Connectivity and expansion
  4. Hardware and software
  5. Price, shipping and risks

Crowdfunding result

The Flipper One, a pocket-sized Linux computer for security work, has passed $11.7 million on Kickstarter in its first 24 hours, according to Notebookcheck. The campaign began with a $300,000 target. The total is about 39 times that amount.

Notebookcheck reported the figure on 19 November 2026. It says the project is aimed at security researchers and hacking enthusiasts. Notebookcheck describes the device as a portable Linux computer. It says the device is for security research, networking tests and custom computing work.

The report puts the amount raised at more than $11.74 million. It says the campaign far exceeded its original goal. The original goal was $300,000. The campaign is on Kickstarter.

What the Flipper One is

Flipper Devices says the Flipper One is a standalone computer that runs Linux. It uses an Arm processor design. The company says it is intended for tasks that need more power than the smaller Flipper Zero.

The company describes the One as a layer one tool. In its wording, this means it is made for IP-connected systems. The Flipper Zero is presented as a lower-power layer zero multi-tool. It covers NFC and RFID, plus sub-GHz radio and UART.

The two devices therefore have different roles. The Zero is a lower-power multi-tool. The One is aimed at network-connected work.

The One is portable. It can operate without a host computer.

Connectivity and expansion

Illustration: mobile network, satellite, Linux logo, computer and the labels 5G, Flipper Devices, Flipper One

For network links, the One can use Wi-Fi 6E and Gigabit Ethernet. It can also use 5G and satellite communications through extra M.2 modules. These modules are expansion parts that add new functions.

Users can add custom cellular antennas and modems. Notebookcheck says this makes it possible to build portable network setups for places with limited connectivity. The internal M.2 slot is described as high-speed.

The expansion options are external hardware modules and the internal slot. They allow the device to connect to more types of networks. They also support custom computing projects.

The modules can add 5G or satellite links. They can also add cellular links. The slot is high-speed.

Hardware and software

The Flipper One uses a Rockchip RK3576 processor. A Raspberry Pi RP2350 microcontroller provides a low-power backup controller. Flipper Devices says this design gives more computing power while keeping a backup path if the main Linux system fails. The backup controller can keep the device working if embedded Linux becomes unusable.

The device has a desktop mode through USB-C. It can scan networks, tunnel traffic and inspect packets. It also has an internal high-speed M.2 slot and support for external hardware modules.

Notebookcheck reports that the Flipper One supports the mainline Linux kernel. The company says it can run software-defined radio applications. It can also run local AI models and local AI workloads.

The mainline kernel is the main Linux kernel. It supports Linux software. The device can run local AI.

Price, shipping and risks

Early backers can order the Flipper One for $399. Flipper Devices says this is 25% below an estimated $550 retail price. The company says the campaign price gives it no profit margin. The $399 price is a crowdfunding price.

It points to a memory shortage as part of the reason. The company says RAM and storage make up about half of the device's bill of materials. That makes memory costs important to the final price.

The memory shortage is ongoing. It affects the bill of materials.

Flipper Devices plans to ship the Flipper One in July 2027 across most markets. It warns that component and chip shortages could change production schedules and delivery dates. The shipping timetable therefore remains uncertain. The company expects shipping to start in July 2027.

Sources

  1. Flipper One pocket hacking PC raises over $11 million in just 24 hours — 39 times its goalNotebookcheck

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.