Skip to content
Theme
OnDevice Tools

AIAI Models & Research

OCR model costs fall fivefold as a million pages scan for under $130

A Hugging Face researcher compared eight freely available OCR models on 850 pages of historic books and archives. The newest was the cheapest and no less accurate, but some models invented text on blank pages.

Illustration of a scanned history book page beside an OCR model cost chart

Key takeaways

  • Eight freely available OCR models were compared on 850 pages of historic books and archival documents, all running on one Nvidia RTX PRO 6000 rented at $2.75 per hour.
  • The cost of processing 1,000 pages fell from about 51 cents with RolmOCR of April 2025 to just under 10 cents with LightOnOCR-3-0.8B of October 2026.
  • A million pages now costs between $65 and $130 in GPU rental, depending on the material.
  • Van Strien says tuning the setup saved as much as upgrading the model, but some models invented text on blank pages or repeated passages.
In this article
  1. What the comparison covered
  2. How much cheaper scanning became
  3. Tuning mattered as much as upgrading
  4. Accuracy held up, but some models invented text
  5. What it means for digitisation projects

What the comparison covered

Illustration: Hugging Face logo, AI, NVIDIA logo, graphics card and the labels NVIDIA RTX Pro 6000, Ocr, Rolmocr

Daniel van Strien of Hugging Face compared eight freely available OCR models. OCR stands for optical character recognition, the technology that turns images of text into editable text. The Decoder reported the comparison on 19 November 2026.

He tested the models on 850 pages in total. The material came from historic natural history works, the 1771 Encyclopaedia Britannica, and archival documents that were typed or printed.

Every model ran on the same graphics card, an Nvidia RTX PRO 6000. Van Strien rented it through Hugging Face for $2.75 per hour, so the costs in the comparison are GPU rental costs. Using one card for all eight models keeps the test consistent, since the price differences then come from the software rather than the hardware. The oldest model, RolmOCR, dates from April 2025. The newest, LightOnOCR-3-0.8B, appeared in October 2026.

How much cheaper scanning became

RolmOCR cost about 51 cents to process 1,000 pages. LightOnOCR-3-0.8B cost just under 10 cents for the same amount. That is a drop of roughly fivefold in 18 months.

Across a million pages, the bill now comes to between $65 and $130 in GPU rental. The spread depends on the material being scanned.

The five models released between those two sit close together on price. Most of the fall is concentrated in the newest release.

Tuning mattered as much as upgrading

Van Strien also changed how the models were run. He fed pages to the card in more even batches, used smaller scans, kept the software current, and moved to a faster GPU.

In his account, that tuning saved about as much money as switching to a newer model, and possibly more. The result suggests that how a model is run can matter as much as which model is chosen.

Accuracy held up, but some models invented text

The newest model read the book pages at least as accurately as the oldest one. In that part of the test, the cheaper option did not lose quality.

Other results were less clean. Some models invented text on pages that were blank, and some repeated the same passage over and over. Errors of that kind are a problem in archives, where an empty page should stay empty.

What it means for digitisation projects

For libraries, archives and researchers, the figures point to a much lower cost for large digitisation work. The numbers cover the text recognition step, not the cost of scanning or storing the pages.

The figures come from one comparison by a single researcher and have not been independently verified. Readers should treat them as an indication rather than a fixed price.

Anyone planning a project should test the models on their own material first. The results on blank pages suggest that output needs checking before it is trusted.

Sources

  1. OCR models now digitize a million pages for under $130 as costs drop fivefold in 18 monthsThe Decoder

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.