DDR6 memory standard promises wider bus and smaller modules
JEDEC has previewed DDR6 memory, with a wider data bus, faster initial data rates and shorter modules. The draft standard is aimed at PCs, data centres and AI systems, but it is not final.

Key takeaways
- JEDEC has previewed DDR6 with a data bus that grows from 64 DQ to 96 DQ.
- Initial DDR6 RDIMM data rates are listed at 12.8 GT/s, with 14.4 GT/s and higher later.
- DDR6 modules are expected to be 74 mm long, compared with 133 mm for DDR5 modules.
- The draft standard is not final and may change before approval.
In this article
What JEDEC has previewed
Notebookcheck reported on 19 November 2026 that JEDEC, the industry organisation that develops memory standards, has given an early preview of DDR6 memory. The draft specification points to a wider data path, faster transfer rates and shorter memory modules. JEDEC says the design is intended for AI. It also targets data centres and high-performance computing.
The preview is not a finished standard. JEDEC warns that the proposed details could change during development and approval. That means the current information should be treated as a roadmap rather than a final product specification.
Wider bus and faster rates

The clearest change is the memory bus. DDR6 is expected to move from 64 DQ to 96 DQ, a 50% increase in width. DQ is the unit JEDEC uses for the data bus width.
JEDEC says the first DDR6 RDIMM data rate will be 12.8 GT/s. That is higher than the 9.2 GT/s cited for current DDR5 RDIMMs. The roadmap also lists 14.4 GT/s and higher rates later. GT/s is the transfer-rate measure used by JEDEC.
Taken together, the wider bus and higher rates are expected to provide over 50% more bandwidth when DDR6 first appears. Bandwidth is the amount of data that can move through the memory system each second. More bandwidth can help processors receive data faster, which matters for demanding workloads.
DDR6 will also use a pseudo-channel design. This approach divides memory access into smaller paths to raise bandwidth per DRAM package. According to JEDEC, this should let system builders choose how to handle reliability and data movement. JEDEC also expects twice as many banks and better refresh efficiency. These changes should help systems perform better at faster speeds and with larger capacities.
Smaller modules and higher capacities
Module size is another major change. JEDEC says DDR6 modules will measure 74 mm, while DDR5 modules measure 133 mm. The smaller size is meant to let systems fit more memory.
The standard is also expected to support higher capacities. JEDEC plans to support memory dies of up to 128 Gb, equal to 16 GB. Better die stacking should allow more memory within a similar package size.
DDR6 is being developed for several form factors. JEDEC says these may include RDIMM, UDIMM and CAMM. The standard should serve many markets, including conventional computing and AI inference. It also targets agentic AI workloads. Such tasks need more memory capacity and performance near the processor.
Power efficiency and reliability
Power use is also part of the draft. DDR6 will introduce VSS-terminated I/O and low-power modes aimed at data centre use. JEDEC says these features are intended to improve performance per watt. The draft also includes several system-level error-correcting code (ECC) options. JEDEC says these will let makers balance cost, power use and reliability.
The target range is wide. JEDEC says DDR6 is being developed for conventional PCs. It also lists data centres and AI servers. High-performance computing is another target. The memory is meant to provide more capacity and performance near the processor, which is important for AI inference and other demanding tasks.
The main point is that DDR6 is still a draft. Notebookcheck reports that JEDEC has only provided an early preview, and the final specification may differ. Until the standard is approved, hardware makers and buyers should treat the bandwidth, speed and module details as proposed rather than guaranteed.
What to watch
The next stage is approval. JEDEC says the DDR6 standard is still being developed, and the proposed features may change before the standard is final. Notebookcheck reports that the preview is early, so the specifications could be revised.
The stated targets include AI and data centres. High-performance computing is also included. JEDEC also says the standard is intended for conventional PCs and AI inference. Until approval, the bandwidth, speed and module details should be treated as proposals.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



