iFixit teardown finds Apple HomeView held together by glue
The repair site says the new Apple HomeView is hard to open and harder to fix, with adhesive on the display, speakers, antennas and logic board.

Key takeaways
- iFixit's teardown of the Apple HomeView found adhesive on the display, speakers, antennas and logic board.
- The wall-mounted model has a wider logic board and smaller speakers than the tabletop version.
- The USB-C port is modular, but a very short woofer cable makes reassembly hard.
- iFixit gave the device a joking score rather than a number, as it has no repairability scorecard for this category.
In this article
What iFixit found inside the HomeView
iFixit has published its teardown of the Apple HomeView, the smart home device Apple launched the previous week, according to 9to5Mac. The repair specialist found a product that resists being opened, with adhesive holding many parts in place.
The display, the speakers, the antennas and the logic board are all bonded with glue or adhesive. Even after soaking the adhesive around the display speakers in isopropyl alcohol, the team struggled. One speaker came apart during removal, and the logic board needed a lot of force to free it from the chassis because thermal adhesive was holding it down.
iFixit examined both versions of the device: the tabletop model and the wall-mounted one. The two are not identical inside.
How the two HomeView models differ

The wall-mounted HomeView has a slightly wider logic board, which makes room for capacitors that sit in the base of the tabletop version. Because of that layout change, the wall-mounted model carries smaller internal speakers.
That detail helps explain the difference in audio between the two models, something Apple had already acknowledged when the HomeView launched. The teardown therefore shows that the two variants are more than the same hardware in different housings.
The display, the base and one very short cable
On the tabletop model, taking the display off the base is difficult. The connecting cables run through the pivot mechanism, so the job needs specialist tools or a disassembly that may damage the display assembly.
Once inside the base, iFixit found some parts that are easier to reach. The USB-C port is a separate module, and the passive radiators and the board that drives the lower section can be accessed without the same struggle.
One problem remained: a very short cable links the woofer to the board beneath it. iFixit questioned how anyone could reconnect that cable when putting the device back together.
Why the teardown matters for buyers
iFixit does not have an official repairability scorecard for this kind of device. Shahram Mokhtari of iFixit joked that he would give the HomeView a rude phrase out of 10 instead of a number, 9to5Mac reports.
The findings contrast with some recent teardowns that found better modularity and easier access. For owners, the practical message is that a failed speaker, port or board is unlikely to be a simple swap at home. Anyone with a hardware fault should turn to Apple's official support and warranty channels rather than attempt a repair.
iFixit's blog post also includes an interactive 3D CT scan of the HomeView for readers who want to see the internals without opening the device.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



