Maker builds Mad Max-inspired wall of 100 Noctua PC fans
Toronto maker Sasa Karanovic has built a 10 by 10 grid of Noctua PC fans to demonstrate his open-source OpenFAN XL fan controller, which can manage up to around 200 fans.

Key takeaways
- Sasa Karanovic built a 10 by 10 wall of 100 Noctua PC fans.
- The fans demonstrate his open-source OpenFAN XL fan controller.
- The controller has 10 headers and controls fans in banks of 10.
- It can support up to around 200 fans in its current form.
- The controller costs 2,355 US dollars on pre-order, down from 2,926 US dollars.
What was built
Maker Sasa Karanovic has assembled a wall of 100 Noctua PC fans arranged in a 10 by 10 grid. The project was created to demonstrate his new open-source OpenFAN XL fan controller. The setup also includes 200 fan grills, 800 screws and many fan splitters.
How the controller works

The OpenFAN XL controller has 10 headers, so the 100 fans are controlled in banks of 10 rather than individually. Karanovic also showed a 50 by 2 arrangement using the same controller. He said the controller handles 100 fans without difficulty and can support up to around 200 fans in its current form. Four integrated temperature probes are included on the board.
Availability and price
The OpenFAN XL controller can be built from open-source plans or purchased from Karanovic Research. It is listed at 2,355 US dollars, reduced from 2,926 US dollars on pre-order. The product page describes it as useful for server or other high-power device builders.
Why it matters
The project is largely a demonstration of what the controller can do rather than a practical cooling solution for most users. Karanovic admitted the contraption probably makes no sense, but suggested it could be used to direct a strong flow of air at a GPU, PC or laptop.
Sources
- Maker builds Mad Max-inspired wall of 100 Noctua PC fansTom's Hardware
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



