iOS 27 Connectivity Assist can use mobile data when Wi-Fi is weak
Apple's iOS 27 adds Connectivity Assist, a feature that uses cellular data when Wi-Fi is weak or unusable. 9to5Mac says it can help when leaving home or using public Wi-Fi.

Key takeaways
- iOS 27 Connectivity Assist can use mobile data when Wi-Fi is weak or unusable.
- Apple says the feature is for places such as back gardens, driveways, cafes, airports and sports venues.
- It is not used during international roaming, in cellular Low Data Mode, or with some audio and video apps.
- It may increase mobile data use, and it can be disabled for a specific network.
In this article
What Connectivity Assist does

Apple's iOS 27 Connectivity Assist is a new feature designed to help iPhone users when Wi-Fi becomes weak or unusable. According to 9to5Mac, the system can use cellular, or mobile, data to keep a device connected during patchy Wi-Fi coverage.
Apple explains that the feature is meant for places where a Wi-Fi signal may not be reliable. Examples include back gardens, driveways, cafes, airports and sports venues. The aim is to reduce the awkward gap between a poor Wi-Fi link and a usable mobile connection.
The feature is presented as a way to handle the middle ground between staying on Wi-Fi and moving to cellular. Instead of waiting for a Wi-Fi network to become useful again, the iPhone can draw on mobile data when needed. 9to5Mac says this can make the connection feel more consistent.
How it helps in daily use
9to5Mac gives a practical example: leaving the house and getting into a car. In that situation, an iPhone may remain attached to a weak home network. That can make it harder to open Apple Music or set up a route in Apple Maps.
Connectivity Assist can use mobile data during that change. This may help the phone move away from the weak Wi-Fi signal sooner. The report describes it as one of several small usability improvements in iOS 27.
The example shows why the feature may matter in everyday routines. A phone does not need to wait for a strong Wi-Fi connection before continuing a task. It can use the mobile network while the Wi-Fi link is poor. That may be useful when leaving home, entering a car, or moving through public places with unreliable Wi-Fi.
Limits and data use
The feature is not active in every situation. 9to5Mac says it is not used while an iPhone is roaming internationally. It is also inactive when cellular Low Data Mode is enabled. Some apps from other developers that play audio or video may not use it either.
There is another trade-off. Connectivity Assist may increase mobile data use because the phone can fall back on cellular when Wi-Fi is poor. 9to5Mac says users can check their usage through a carrier app or website, and in the Settings app on iPhone.
This means the feature can change how data is used. It can improve connectivity, but it may also move traffic onto a mobile plan. Users who have a limited data allowance should watch their usage. Those who travel abroad should note that the feature does not operate during international roaming.
How to control it
9to5Mac says Connectivity Assist can be turned on or off. The report also says users can disable it for a particular network. That may be useful for someone who wants a specific router to remain the preferred connection.
The control is important because the feature changes how the iPhone chooses a connection. It does not simply keep the phone on Wi-Fi at all times. It also does not force mobile data in every situation. Instead, it adds another option when the Wi-Fi link is poor.
Apple's support document is the underlying reference for the feature's behaviour. The report presents the option as a way to manage the balance between Wi-Fi and cellular.
Why it matters
This feature targets a situation where a phone holds onto a weak Wi-Fi signal. That can interrupt simple tasks, such as starting music or checking a map.
For many users, the benefit is convenience. For users with limited mobile data plans, the risk is higher data use. The feature therefore gives control rather than forcing a switch. It can be switched off, or disabled for a chosen network, according to 9to5Mac.
iOS 27 includes this feature as part of its connection improvements. A weak Wi-Fi signal can interrupt a normal task. Connectivity Assist is designed to reduce that interruption by using cellular data when appropriate. The feature's limits and data-use warning show that it balances convenience with control.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



