Skip to content
Theme
OnDevice Tools

GadgetsLaptops & PCs

Floppy Wi-Fi NAS reads old camera floppies

A hardware maker shared open-source plans for a portable drive that copies old camera floppies over a network.

Illustration of a portable open source floppy Wi-Fi NAS device beside a three point five inch floppy disk

Key takeaways

  • The floppy3.5 device is portable and its design is open source.
  • It reads and shares three point five inch floppy disks over Wi-Fi or a direct connection.
  • It uses the Greaseweazle protocol and supports FAT12 by default.
In this article
  1. What the builder made
  2. How the design works
  3. Who may find it useful
  4. What it means

What the builder made

Tom's Hardware reports that a hardware maker has built a portable floppy Wi-Fi NAS.

The builder, known as BigCrimping or Crimp, released the design on 21 November 2026. The device is called floppy3.5, and its plans are open source, with files shared on GitHub. The builder paired an RP2354A microcontroller with an ESP32-S3 bridge in a custom circuit board.

How the design works

The builder used a Greaseweazle floppy drive communications protocol, so the device did not need a normal floppy drive controller. It gave the builder full control over the drive, and Greaseweazle manages the drive wire signals directly. That made imaging and data handling easier. The device understood FAT12 by default and could use Greaseweazle utilities over the cable.

Who may find it useful

Illustration: camera, computer, router, storage drive and the labels Open Source, Laptops & PCs

The device may appeal to owners of older digital cameras. Tom's Hardware notes the revival of vintage hardware also covers early camera models such as the Sony Mavica and Panasonic PV-SD families. Those cameras used ordinary three point five inch floppies in PC format. The floppy3.5 can act as an easy archival tool. A card in its slot can store disk files, so users can add floppies one by one without a computer.

What it means

The builder added a small monochrome LCD to show sector and cylinder counts, a good or bad sector map, file counts, and firmware update progress. Buttons let the user read, save, display or power the device. The user can also connect by USB cable for features such as fetching whole disk images. The network option allows access through a web interface. Tom's Hardware reports the details, and the source has a listed trust level of unverified.

Sources

  1. Hardware hacker builds open-source portable 3.5-inch floppy Wi-Fi NASTom's Hardware

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.