How to find your IP address on Windows, Mac and phones
Engadget explains how to locate public and private IP addresses on Windows, Mac, iPhone, Android and routers, and why the address can change.

Key takeaways
- A home network uses a public address from the provider and private addresses from the router.
- Windows users can find the private address through network settings or the ipconfig command.
- Mac users can press Option and click the Wi-Fi menu icon for a quick view.
- Public addresses can change, and a VPN can hide the address from websites.
In this article
Public and private addresses
Engadget published a guide on 15 November 2026. If you need to find your IP address, the answer depends on which address you mean, according to the publisher. A device on a home network uses a private address, while the whole home uses a public address for the outside world.
Engadget explains that a home network has two kinds of address. The router gives each device a private address for local use. The internet provider supplies a public address that outside websites see.
The router translates between the private and public addresses. This allows several devices, including handsets, computers and televisions, to share the connection while appearing as one public address outside the home. The router also assigns private addresses through a system called DHCP, which usually runs inside the router.
The correct address depends on the task. A public address is useful for outside services. A private address is useful for local network work.
Find your public IP address
The quickest browser method is to open DuckDuckGo and search for what is my IP. Engadget says the result appears near the top. Sites such as WhatIsMyIP can also show the address, along with an approximate location and the name of the internet provider.
Engadget also notes that Terminal on Mac and Command Prompt on Windows can show the public address. This method avoids the browser. The public address is the one shown to websites and other outside services.
Find your private IP on Windows and Mac
On Windows 11, Engadget says to open the taskbar network icon with a right click, then open Network and Internet settings. Wi-Fi users should select Wi-Fi, then the connected network. Ethernet users should select Ethernet. The private address appears on the IPv4 address line after scrolling past technical details.
The list can look confusing. Engadget advises ignoring entries that include IPv6 and focusing on the IPv4 line. The address contains four number blocks divided by dots.
Windows 10 follows a similar path. On Wi-Fi, an extra step may be needed to open hardware properties. A simpler method is to open Command Prompt and run ipconfig. This works across Windows versions and shows the IPv4 address for the active connection.
On a Mac, press and hold Option, then select the Wi-Fi menu icon. The address appears there with the router address. For a wired connection, or a longer route, open System Settings from the Apple menu, choose Network, select the connection, click Details, and check the TCP/IP tab.
Find your IP on phones and routers

On an iPhone, Engadget says to open Settings, tap Wi-Fi, then tap the information icon beside the network. The IP address appears lower down the page. Many Android phones use a similar path, though the exact menu can vary by maker.
On a Pixel, the route is Settings, Network and internet, Internet, the gear icon, then Network details. The IPv4 address is listed there. Because manufacturers change menus, the wording may differ.
A router also has a separate address. This is the address used to reach the router settings page in a browser. Devices often list it as Default Gateway or Router. Common values include 192.168.1.1, 192.168.0.1 and 10.0.0.1. Windows ipconfig output also shows it.
Why it matters and privacy
Most people need this information for troubleshooting. If a connection is slow or has stopped, the provider may ask for the device address to check whether the issue is local or on its side. It can also help when adding a printer to a network, hosting a game service, or reaching a home computer from elsewhere.
A public address often changes. Many home connections use dynamic addresses, and the value may change after restarting the modem or router. Static addresses exist, but they are mainly used for servers, such as those that host websites or run email.
A public address usually points to a network rather than one person. Random users cannot look up the address of another person from their own device. Online services and advertisers can still view it and may use it to infer interests. A VPN hides the address from them and encrypts traffic. A proxy can also hide it, but not all proxies encrypt traffic.
Sources
- How to find your IP addressEngadget
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



