Apple HomeView repair looks difficult after iFixit teardown
Apple HomeView repair looks difficult after iFixit found strong adhesive and a risky thermal bond in the smart hub, The Verge reports.

Key takeaways
- iFixit says strong adhesive makes the HomeView display hard to remove.
- The aluminium body acts as a heat sink, but its thermal bond complicates repair.
- The wall-mounted HomeView has smaller speakers than the tabletop model.
- Both HomeView versions cost $299, but the wall version needs a mount that is not included.
In this article
What the teardown found
Apple HomeView repair looks difficult after iFixit opened the smart hub and reported its findings, according to The Verge. The Verge published the report on 17 November 2026. The device resembles a seven-inch tablet attached to a smart speaker.
iFixit expected the HomeView to be similar to recent iPads and HomePods. The repair site has found those devices easier to take apart for battery replacement and other repairs. The HomeView was different, and the teardown proved more challenging than expected.
The process was not gentle. iFixit says its technicians damaged a connector and broke a speaker while opening the device. They also said the main board was put under more pressure than they wanted. The report suggests the HomeView is not designed for easy servicing.
Glue and heat sink design
The tablet section of the HomeView caused the biggest problems. iFixit says the adhesive holding the display in place was stronger than on recent Apple products it has opened. That makes screen removal harder and raises the risk of damage.
Apple also uses the HomeView's aluminium body as a heat sink. A heat sink helps move heat away from internal parts. iFixit describes this as a clever design choice.
The problem is the thermal connection between a heat shield and the logic board. The logic board is the main circuit board inside the device. iFixit says separating those parts was a risky step. The heavy use of glue may make factory assembly simpler, but it makes later servicing much harder.
Wall and tabletop versions

iFixit also compared the wall-mounted HomeView with the tabletop model. Both versions cost $299. The wall version has smaller speaker drivers than the tabletop version, according to iFixit. Speaker drivers are the parts that produce sound.
The wall model also needs a mount, and that mount is not included. This means the wall version can cost more overall. iFixit says buyers may end up paying more while receiving less audio performance. The comparison shows that the wall version has a higher total cost and smaller speakers.
What it means for buyers
Repairability can affect how long a device remains useful. Strong adhesive and bonded parts can make repairs slower and more difficult. They can also increase the chance of breaking something during routine service.
The Verge says the HomeView result contrasts with Apple's recent moves toward easier repairs. For buyers, the teardown suggests that fixing the HomeView could be harder than fixing some other Apple devices. It also shows that design choices made for assembly can have costs after purchase.
The report does not rule out repair, but it shows that repair may require more care and carry more risk. That matters for owners and repair shops.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



