Skip to content
Theme
OnDevice Tools

GadgetsSmart Home

Phone camera remote battery test shows if a TV remote is dead

A short Engadget guide explains how to spot the infrared flash from a remote control, and why a missing flash does not always mean the batteries have failed.

Illustration of a hand holding a TV remote in front of a smartphone camera

Key takeaways

  • A phone camera can pick up the infrared pulse from a remote, so a visible flash means the batteries still hold charge.
  • Engadget suggests testing the power button, since many Bluetooth remotes still use infrared for that command.
  • A button that produces no flash may be using Bluetooth, or it may be damaged rather than out of power.
  • The Google Home app can act as a remote for Google TV and Android TV sets, with a network standby option needed to power them on.
In this article
  1. How the phone camera test works
  2. Infrared emitters and Bluetooth remotes
  3. What the flash can and cannot show
  4. Using a phone as the remote instead

How the phone camera test works

Illustration: camera, phone, battery, TV and the labels Android TV, Bluetooth, Google Home

Engadget has published a short guide to a phone camera remote battery test, a way of checking whether a television remote still has enough charge. The post, dated 22 November 2026, needs nothing more than a smartphone and the remote itself.

The steps are brief. Open the camera app on a phone and point it at the remote. Then press and hold a button while watching the phone screen.

Engadget recommends the power button, because many Bluetooth remotes still rely on infrared for that job. If a small light flashes at the front of the remote, usually with a slight purple tint, the batteries still hold enough charge.

Infrared emitters and Bluetooth remotes

A remote sends each command to the television as a pulse of infrared light. The source is a tiny LED at the front of the remote, which Engadget describes as usually easy to spot, although some newer models hide it behind a dark plastic window.

Many televisions now ship with Bluetooth remotes that add features such as voice control. Those same remotes may still use an infrared emitter for basic tasks, including switching the set on and off.

What the flash can and cannot show

The same test can reveal which technology a particular button uses. Press the volume control and see no flash, and that command is travelling over Bluetooth rather than infrared.

The method has limits. A worn or damaged button may not register a press at all, so the emitter stays dark even when the batteries are fine. Engadget notes that the trick cannot diagnose every remote fault, so a missing flash does not prove the batteries are flat.

Using a phone as the remote instead

Households that would rather avoid battery swaps can use a phone in place of the handset. According to Engadget, the Google Home app works with smart televisions powered by Google TV or Android TV. It provides D-pad controls for menus, volume buttons and a keyboard that makes searching for film titles quicker.

One caveat applies. If the virtual remote will not switch the television on, the set's network standby settings may need adjusting. Some models label this option Wake-on-LAN. With that enabled, Engadget says, flat batteries in the physical remote stop being a worry.

Sources

  1. The cool phone camera trick that can test your remote control's batteryEngadget

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.