Skip to content
Theme
OnDevice Tools

GadgetsSmartphones

Oppo Find X11 Pro Max may hide bezels under curved glass

A leak suggests the Oppo Find X11 Pro Max could use four-sided curved cover glass and an almost invisible bezel. The claim is unconfirmed and may apply only to a premium model.

Illustration of an Oppo Find X11 Pro Max with very thin bezels and curved glass edges

Key takeaways

  • GSMArena reports an unconfirmed rumour that the Oppo Find X11 Pro Max may use four-sided curved cover glass.
  • The rumoured visual bezel is about 0.3mm, far thinner than the 1.15mm bezels on the Find X10 Pro Max.
  • The leak comes from Digital Chat Station on Weibo and has not been confirmed by Oppo.
  • Another rumour links the phone to remaining Find X10 Ultra hardware, including a 6.89-inch display, 200MP main camera and 100MP selfie camera.
In this article
  1. What the leak claims
  2. How thin the bezel would be
  3. What four-sided curved glass means
  4. Possible link to Find X10 Ultra
  5. What remains uncertain

What the leak claims

The information comes from Digital Chat Station, a tipster on Weibo, who shared an early look at a future Oppo flagship display. GSMArena reports that the design would combine a flat screen panel with very tight packaging at the edges. The cover glass, the protective layer above the display, would bend at every edge.

The tipster says the visible bezel would be about 0.3mm, give or take. That would make the screen appear almost free of a frame. He also claims the technology is comparable to Apple, presumably linked to the 20th anniversary iPhone.

The comparison with Apple is not confirmed. The leak does not provide official specifications. The phone is still at the rumour stage. The tipster did not share official Oppo material at this time.

How thin the bezel would be

Oppo already uses narrow bezels on its current phones. GSMArena notes that the current Find X10 Pro Max is listed with 1.15mm bezels. The Find X10 is listed at 0.99mm. A 0.3mm visual bezel would therefore be a big jump from either model.

A thinner bezel would reduce the visible border around the screen. The rumoured design would keep a flat panel, while the glass above it curves at the edges. That could reduce the visible frame without a fully curved display.

The term visual bezel matters because the visible border can look smaller even if the phone frame remains. In the rumoured design, the curved glass would help hide the edge. The report does not give the full dimensions of the phone.

What four-sided curved glass means

The described screen would not simply have a flat sheet of glass with very small borders. Instead, the cover glass would bend at each edge. This could make the frame look less noticeable when the phone is viewed straight on.

The report says the panel itself would remain flat. That means the display surface would not itself be curved. The effect would come mainly from the glass above the panel and the tight packaging around the edges.

Illustration: camera, phone, OPPO logo, computer and the labels Apple, Curved Glass, Digital Chat Station

The display rumour arrives after another claim about Oppo product plans. Last week, remaining components from the Oppo Find X10 Ultra, which is reportedly cancelled, were said to be moving to a later phone. That phone is expected to be the Find X11 Pro Max.

When asked whether Oppo would still have a camera-focused flagship, Digital Chat Station replied with the letters PM. GSMArena interprets this as pointing to a Pro Max model. The earlier rumour says the phone could inherit a 6.89-inch BOE display, a 200MP main camera and a 100MP square selfie camera.

What remains uncertain

None of these details has been confirmed by Oppo. The tipster also says the curved-glass method would cost more and would be limited to costly models in a flagship line. He says OnePlus would keep using conventional flat screens.

The phone is still believed to be many months away from launch. That means the design, camera hardware and display plans could change before release. The rumour also shows how Oppo may be reusing hardware from a cancelled device.

For now, the 0.3mm bezel claim should be treated as an unverified leak rather than a confirmed feature. If it proves accurate, it would give Oppo a very thin-bezel flagship. The specifications should be treated as rumours until Oppo announces the phone.

Sources

  1. Oppo's next Pro Max may hide its bezels under four-sided curved glassGSMArena

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.