Skip to content
Theme
OnDevice Tools

GadgetsSmart Home

Large Hadron Collider magnets replaced in CERN upgrade

CERN is dismantling the Large Hadron Collider to install niobium-tin magnets for the High-Luminosity upgrade, with startup planned for June 2030.

Illustration of CERN engineers installing large superconducting magnets in the Large Hadron Collider tunnel

Key takeaways

  • CERN is removing 28 superconducting magnets from the Large Hadron Collider.
  • The replacements are the first niobium-tin magnets ever used in an accelerator.
  • About 90 percent of the 250 new coils passed manufacturing tests.
  • The High-Luminosity LHC is planned to begin operations in June 2030.
In this article
  1. What is happening
  2. The new magnets
  3. Why the upgrade matters
  4. What comes next

What is happening

TechRadar reports that CERN is taking apart the Large Hadron Collider to fit magnets made from niobium-tin, a superconductor that conducts electricity without resistance and has never operated in an accelerator before. The European research organisation halted operations in late June 2026, and engineers began dismantling sections around the ATLAS and CMS experiments on 7 September 2026. The work is part of the High-Luminosity LHC upgrade, which is planned to begin operations in June 2030.

The new magnets

Illustration: Proton logo, update, business, storage and the labels Cern, Large Hadron Collider, Superconductor

Teams are removing 28 superconducting magnets from the machine. These include the inner triplets, which compress the proton beams shortly before they meet at the collision points. The old magnets use niobium-titanium, a ductile material that can be drawn like wire. They are being replaced by quadrupoles, a type of focusing magnet, made from niobium-tin, also known as Nb3Sn, a niobium-tin compound.

Niobium-tin can operate in much stronger magnetic fields than niobium-titanium, but it becomes too brittle to bend after forming. Because of this, teams shape the wire into coils before heating it for days to form the superconductor. The programme produced 250 coils, and 25 did not pass testing. One coil was scrapped after a single metal particle was suspected of affecting its performance.

The success rate matches an earlier American effort, where 89 percent of the first batch passed. That result is strong evidence that the process can be repeated at larger scale.

Why the upgrade matters

The High-Luminosity LHC is intended to raise proton collisions from about 60 per bunch crossing to a range of 140 to 200. More collisions give physicists more chances to observe rare events and produce larger data sets. CERN passed an exabyte of storage capacity, a very large unit of data storage, in 2023 and runs more than 120,000 hard drives in its central data center.

The new magnets have a 150 millimetre aperture. The old ones were 70 millimetres. The wider opening gives the beam space to expand while moving through the magnet, allowing the magnets to concentrate the beam into a tight spot at the collision point. CERN says these 7.2 metre quadrupoles are the longest accelerator-quality niobium-tin magnets ever built.

What comes next

Startup is planned to begin operations in June 2030, around a year behind the initial plan. The experience gained from building these magnets will matter for future projects, including the proposed Future Circular Collider, which would require thousands of similar magnets. CERN's High Field Magnet program is targeting niobium-tin dipoles with a 14 tesla operating field, and the proposed proton successor would need more than 4,400 dipoles. CERN's council has named an electron-positron version of that collider as its preferred next flagship, with a build decision expected around 2028.

Sources

  1. The Large Hadron Collider is being taken apart to fit magnets that have never run in an accelerator beforeTechRadar

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.