iPhone 20 Pro rumoured to return to titanium in rounded redesign
A leaker claims the 20th-anniversary iPhone 20 Pro prototypes use a titanium frame with a much rounder shape, echoing earlier reports of curved glass and a thin metal band.

Key takeaways
- Leaker Fixed Focus Digital claims iPhone 20 Pro prototypes use a titanium frame with a rounded design.
- Apple moved the iPhone 17 Pro to aluminium in 2025, ending titanium frames used on the iPhone 15 Pro and 16 Pro.
- The claim matches Mark Gurman's report of curved glass around a thin metal band, the biggest Pro redesign since the iPhone X.
- The devices are expected in autumn 2027, and the final materials and name are not confirmed.
In this article
Titanium may return for the Pro line
Apple's rumoured iPhone 20 Pro could come in a titanium case again, if a claim from the leaker Fixed Focus Digital proves correct. In a post on Weibo, the leaker said prototype handsets in early engineering work currently carry a titanium frame.
According to MacRumors, the same post describes a shape that recalls the iPhone Air, but with noticeably rounder edges. The claim concerns development hardware, so nothing is confirmed about the final product. Apple has not commented.
If accurate, the move would reverse a recent decision. Apple fitted titanium frames to the iPhone 15 Pro and iPhone 16 Pro, then moved the iPhone 17 Pro to a single-piece aluminium body in 2025. At the time, the company pointed to aluminium's ability to conduct heat, and the redesign also added a vapour chamber, a small internal cooling structure, to keep performance steady under load.
That change was well received for its cooling, low weight and distinct look. Still, some buyers missed the premium feel of titanium and its greater resistance to damage. The iPhone Air and iPhone Duo continue to use titanium frames today.
How the rumoured design fits earlier reports
The titanium claim builds on a series of leaks about Apple's anniversary models. Earlier this week, Fixed Focus Digital said the new phones would use the same glass material as the iPhone Air, reshaped with stronger curvature on all four sides. A drawing published with that post showed curved front and rear glass meeting a narrow, polished metal frame.
Back in August, the same leaker claimed Apple had altered iPhone Air production equipment so it could make these rounder glass parts. Gurman adds that a bolder early version, which replaced even more metal with glass, was dropped during development.
The new claim suggests titanium could be the material of that remaining band. Gurman has called the planned changes the largest redesign of the Pro line since the iPhone X.
Conflicting views on the curvature
The amount of curve may not be settled. On the same day, the leaker Ice Universe claimed Apple is working on four models in two designs: two with flat glass and two with glass that curves along every edge. Apple has reportedly studied the curved approach for three years, toning down earlier versions that bent more sharply.
The curved models are said to have borders of around 1mm. With glass wrapping the edges, these borders would look almost invisible from the front. Screen protector samples shared online appear to match this idea, showing rounded corners, gentle curves on all four sides and very slim bezels.
Camera, chip and other rumoured changes

Ice Universe also offered claims about the inside of the phone. The main camera could gain a sensor whose logic circuits are made on a 17-nanometer process, which may allow faster readout of image data and better power efficiency. Readout speed matters because it affects how quickly the sensor captures each frame.
The leaker further suggested the phone could lose the Action button, the small customisable control introduced on recent Pro models, and could run on an A21 Pro chip built on TSMC's enhanced 2nm process, known as N2P. These points remain unconfirmed.
What to expect and why it matters
The anniversary models are expected in autumn 2027, so there is a long wait ahead. Leakers use the name iPhone 20 Pro, but Apple's real naming plans are unknown, and early prototype details often change before launch.
Even so, the reports point in a consistent direction: a deeply rounded body, narrow borders and a slim metal band, possibly in titanium. For buyers who preferred the feel of the iPhone 15 Pro era, a return to titanium would be welcome news. Anyone deciding whether to upgrade this year may want to keep the 2027 redesign in mind.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



