Bose headphone settings you may need to turn on manually
Engadget highlights five features in the Bose app that stay off until owners enable them, from an equaliser to multipoint Bluetooth and call settings.

Key takeaways
- Bose headphones ship with several features disabled until they are enabled in the Bose app.
- The equaliser offers three bands, bass, mid and treble, plus presets, and Engadget suggests lowering the bass first.
- Bluetooth multipoint lets compatible headphones connect to two audio sources at once.
- Self Voice, found under the settings gear, controls how much of your own voice you hear on calls.
In this article
Five Bose settings to switch on
According to Engadget, several useful Bose headphone settings stay switched off until the owner turns them on in the companion app. In a piece dated 17 November 2026, the site lists five adjustments that can change how the headphones sound and behave.
The controls built into the headphones are fairly basic, so most of these options live in the phone app rather than on the earcups. Engadget also notes that not every model offers every setting, a point covered in more detail below.
Fine-tuning sound and Bluetooth
The first setting is the equaliser, or EQ, which lets an owner reshape different sound frequencies to taste. Engadget says reviewers often criticise Bose for pushing the bass too hard straight from the box, so easing it down first can help. The EQ provides three bands, bass, mid and treble, along with a set of presets, and it sits on the app's home screen.
The second is Bluetooth multipoint, which lets the headphones hold a link to two audio sources at the same time. That removes the usual routine of disconnecting and reconnecting when moving from a laptop to a phone. The option sits under Bluetooth Connections in the app's settings, and to change source you pause audio on one device and press play on the other.
Noise cancelling modes and shortcuts

Bose headphones also offer several noise-cancelling modes, and newer models add more of them. On the QuietComfort Ultra, the Quiet mode blocks sound fully while Aware mode lets outside noise in. Engadget says recent headphones add Immersion mode, which tries to make music seem as though it is playing on a stage ahead of the listener, and Cinema mode, which sharpens dialogue during films and shows. Owners can also build their own custom modes.
A shortcut is the fourth option. The QuietComfort Ultra use a touch-sensitive strip, while older models rely on an Action Button, and both can trigger a chosen action. Depending on the model, that action might read out the battery level, switch the Immersive Audio mode or jump between paired Bluetooth devices. Headphones allow one shortcut, though some earbuds let each ear have its own.
Self Voice for clearer calls
The fifth setting is called Self Voice, a more niche feature tied to how your own voice sounds during calls. By default, Bose headphones feed some of your voice back to you, a trick known as sidetone, so speaking feels more natural. Without it, your voice can sound oddly muffled.
Self Voice is not on the app's home screen. Engadget says you tap the settings gear and look for it there, where the level can be set to High, Medium or Low, or switched off. Once left on, it starts by itself during calls, so there is no need to switch it on each time.
Which headphones support them
Not every Bose pair can use all five settings. Engadget says the newer QuietComfort models include features that the first-generation QuietComfort Ultra and QuietComfort headphones do not have. Owners of older pairs may find some options missing from the app.
For anyone unsure what their headphones can do, the practical step is to install the Bose app and look through its settings menus. Engadget frames the exercise as a way to get more from headphones that already sound good out of the box, without buying anything new.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



