Skip to content
Theme
OnDevice Tools

Tech BusinessChips & Semiconductors

KAIST proposes backside clock mesh to reduce skew and power

Semiconductor Engineering reports a KAIST paper that places a clock mesh on backside metal layers in a backside power delivery design. The work targets clock skew and power use, but the report gives no independent test results.

Illustration of a chip cross-section showing backside clock mesh layers

Key takeaways

  • KAIST researchers propose a clock mesh on backside metal layers for backside power delivery chips.
  • The clock mesh and power network must share backside metal layers.
  • Keep-out zones between clock and power nTSVs complicate mesh receiver placement.
  • A potential-field method is proposed, but the report gives no independent test results.
In this article
  1. What the research proposes
  2. How the backside clock mesh works
  3. The receiver placement problem
  4. Potential-field method and claim status
  5. Why it matters

What the research proposes

According to Semiconductor Engineering, researchers at KAIST have proposed a clock distribution network for chips that use backside power delivery. The report was published on 17 November 2026. It draws on a paper by Seohyun Kim, Youngjin Chae, Shilong Zhang and Youngsoo Shin.

The paper is listed as arXiv:2611.20414. It describes a clock network that uses a backside mesh in a BSPDN design. The work is described in an abstract excerpt. The excerpt says the clock mesh is placed on backside metal layers.

How the backside clock mesh works

Illustration: Meta logo, news, market trend and the labels Backside Power Delivery, Bspdn, Clock Mesh

The design keeps the rest of the clock network on the frontside. Only the clock mesh moves to the backside metal layers. The backside power distribution network, or BSPDN, also uses those layers. The clock mesh and the power network must share them.

This sharing is central to the paper. The authors say BSPDN uses the same backside metal layers. The design therefore has to manage both clock and power structures in the same area.

The receiver placement problem

The paper identifies a problem with placing mesh receivers. These receivers must be positioned while respecting keep-out zones between clock and power nTSVs. Keep-out zones are areas where other structures must be kept away. The authors describe this as an important problem.

The issue arises because the clock mesh and power network share backside metal layers. The paper says receiver placement must account for the keep-out zones. This makes the placement task a specific design challenge.

Potential-field method and claim status

The authors propose a potential-field method to solve the receiver placement problem. The method is intended to place mesh receivers while accounting for the keep-out zones. Semiconductor Engineering reports that the paper presents this as a way to handle the shared backside metal layers. The method is named in the abstract excerpt.

The report does not include measured results or independent test data. Skew is a timing difference in clock signals. The statement that the approach reduces skew and power should therefore be treated as a claim from the paper. It has not been verified by Semiconductor Engineering.

Why it matters

The work is relevant to chip designers who use backside power delivery. This approach places power distribution on the backside of the chip, using backside metal layers. The paper focuses on designers who must place clock and power structures in that shared space. It addresses a design problem created by this sharing.

The paper is due to be presented at the 32nd Asia and South Pacific Design Automation Conference in Tokyo. The conference is known as ASPDAC. The event runs from 25 to 28 January 2027. The publication details list ACM as the publisher and seven pages.

Sources

  1. Backside Clock Mesh Reduces Skew And Power In Backside Power Delivery (KAIST)Semiconductor Engineering

Tags

Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.