China engineers pioneer 3D-printed aircraft structures for J-35
Chinese engineers have made a metal part longer than 16.4 feet for military aircraft, according to Tom's Hardware. The work points to faster production and fewer fasteners, but the claim is not independently verified.

Key takeaways
- Tom's Hardware reports a metal aircraft part longer than 16.4 feet made by a Chinese institute.
- The part is linked to the J-35 fighter jet platform and AVIC.
- The team used section printing and a joining process to avoid warping and cracking.
- The claim is unconfirmed and lacks independent technical data.
In this article
What the report says
According to Tom's Hardware, which cites Global Times, the Shenyang Aircraft Design and Research Institute used metal 3D printing, a process that builds parts instead of using moulds, to make a large structural part for military aircraft. The part is reported to be more than 16.4 feet, or five metres, long. Tom's Hardware describes the institute as the country's first aircraft research organisation and links it to the J-35 fighter jet platform. The institute sits under the Aviation Industry Corporation of China, or AVIC. The component is described as a main load-carrying part, meaning it is meant to bear forces within the aircraft. The report says the part cuts the need for bolts and helps research move faster. The report says the work reflects decades of additive manufacturing research. The claim has not been independently verified.
Why large printed parts matter
Large metal aircraft parts are difficult to produce with conventional methods. The report says titanium alloys are hard to machine, cast parts can be weak, and joining pieces with bolts adds labour. Metal 3D printing can address these problems by building a part in the desired shape with fewer separate pieces. Tom's Hardware says this reduces the need for expensive moulds and additional fasteners. It also reduces multi-part construction. The approach can speed up research because engineers can change designs more quickly. The report adds that printed parts can allow more complex shapes than traditional manufacturing. It says the process can create a strong part in the desired shape as one large piece. The report says this can reduce labour and tooling costs.
How the team avoided warping
The part was not made in one piece. The report says the team split the job into sections and then used a metal joining process based on 3D printing. This helped avoid warping and cracking, which can happen when printing very large metal parts. Tom's Hardware points to a Chinese Journal of Lasers paper about laser-based production of large titanium parts. That paper is cited for the challenges of making big titanium structures. The report says the joining step is part of the overall production workflow, not a separate add-on. It describes the result as one whole printed piece. The two methods are presented as ways to manage those risks. The report says the methods are meant to avoid defects that can appear in very large printed metal parts.
Decades of development

The institute has worked on 3D-printed aircraft parts since 2003, according to Tom's Hardware. In 2005, it made parts that carry secondary loads. In 2012, it made large titanium alloy parts that carry primary loads, and the team received a national technology invention award. The award was linked to Wang Huaming and his colleagues. The report says these milestones built up over years of research into metal 3D printing. Before the latest part, the team had already made large printed components. The report says the team's earlier work helped pave the way for the latest part. The latest part is reported to be larger than those earlier efforts. This suggests a gradual move from smaller printed components to much bigger structural pieces.
What remains unclear
If confirmed, the work would show that metal 3D printing can be used for very large aircraft structures, not just small parts. It could reduce production time and part count for military aircraft. However, the claim is unconfirmed and should be treated with caution until more evidence is available. The available material does not include independent test data, technical specifications, flight test results, or details on which aircraft will use the part. For now, the main confirmed detail is that Tom's Hardware has reported the claim, citing Global Times.
Sources
Spotted a mistake? See our corrections policy. Read how News by OnDevice works in our editorial policy.



